IFBR1C FIRMWARE CHANGE LOG
v1.04
- Compatibility update for units shipping after July 2022. No new features.
- Hardware versions supported:
- IFBR1C-0
v1.03
- Add non-volatile pilot tone squelch bypass setting, including new settings menu page titled "Pb". The default setting is "Off". If set to "On", the "LINK" LED illuminates when the unit is unmuted.
- Improved RSSI squelch algorithm to reduce loud audio bursts when squelching at the edge of the operating range.
- Hardware versions supported:
- IFBR1C-0
v1.02
- Add IR "clone" function to copy all user-modifiable settings from one unit to another. This is available on a new setup page named "CLonE", where pressing the UP button starts the IR transfer.
- Fix bug causing receiver to freeze in the power "on" state when the "Lo bat" warning is displayed.
- Hardware versions supported:
- IFBR1C-0
v1.01
- Briefly mute the audio when tuning the receiver, to eliminate the possiblility of noise bursts in the headphones.
- Hardware versions supported:
- IFBR1C-0
v1.00
- First production release firmware version.
- Hardware versions supported:
- IFBR1C-0
IFBR1C-VHF FIRMWARE CHANGE LOG
v1.04
- Add non-volatile pilot tone squelch bypass setting, including new settings menu page titled "Pb". The default setting is "Off". If set to "On", the "LINK" LED illuminates when the unit is unmuted.
- Improved RSSI squelch algorithm to reduce loud audio bursts when squelching at the edge of the operating range.
- Hardware versions supported:
- IFBR1C-VHF-0
v1.03
- Add IR "clone" function to copy all user-modifiable settings from one unit to another. This is available on a new setup page named "CLonE", where pressing the UP button starts the IR transfer.
- Fix bug causing receiver to freeze in the power "on" state when the "Lo bat" warning is displayed.
- Hardware versions supported:
- IFBR1C-VHF-0
v1.02
- Fix bug where receiver tunes to incorrect frequencies after "wrapping around" when tuned beyond band edges.
- Hardware versions supported:
- IFBR1C-VHF-0
v1.01
- Briefly mute the audio when tuning the receiver, to eliminate the possiblility of noise bursts in the headphones.
- Hardware versions supported:
- IFBR1C-VHF-0
v1.00
- First production release firmware version.
- Hardware versions supported:
- IFBR1C-VHF-0